Gravel-Pack Single

Single bag

10 reviews

Waterproof pannier bag with roll closure and Quick-Lock mounting system.

Color: black matt

Material:

Nylon PS21R

Mounting system

QL3.1 QL2.2

SKU: F9989

In stock – Delivery time: 2-3 business days

5 year

5-Year Warranty

ORTLIEB Manufacturer's Warranty for End Customers – 5 Years

This voluntary manufacturer's warranty ("Warranty") grants additional rights and does not affect the statutory warranty rights against the seller. The exercise of statutory rights is free of charge and independent of this Warranty.

Warrantor is ORTLIEB Sportartikel GmbH, Rainstraße 6, 91560 Heilsbronn, Germany ("ORTLIEB"), email: customerservice@ortlieb.de.

1. Subject matter and scope of the Warranty

ORTLIEB warrants that the product is free from material and workmanship defects under normal use. The Warranty applies worldwide to ORTLIEB products purchased from authorized retailers or online dealers or directly from the ORTLIEB web shop. It is limited to the first purchaser and is not transferable.

2. Warranty period

The warranty period is 5 years from the date of first purchase from a retailer or online dealer or directly from ORTLIEB by the end customer. The end customer is the customer who first purchased the ORTLIEB product for their own use — not for resale — from a retailer or online dealer or directly from the ORTLIEB web shop. The invoice or delivery date of the first purchase is decisive. Proof is provided exclusively by the purchase receipt or invoice. A repair or replacement does not extend or renew the warranty period; the date of the first delivery remains decisive.

3. Scope of warranty performance

In the event of a warranty claim, ORTLIEB will, free of charge:

repair the product itself; or
replace the product with an equivalent product if repair is impossible or uneconomical.

No further claims arise from this Warranty. Statutory claims remain unaffected.

4. Exclusions

The Warranty does not cover in particular:

normal wear and age-related changes (e.g., wear of surfaces, zippers, buckles),
damage resulting from improper use, overloading, or failure to observe assembly/care instructions,
damage due to third-party interventions, modifications, or the use of non-approved spare parts/accessories,
damage due to improper transport, storage, cleaning, or care,
chafing marks, holes, and tears caused by the user's own fault.

These exclusions apply exclusively to this Warranty. Statutory rights for defects remain unaffected.

5. Making a warranty claim

The first point of contact in warranty cases is generally the retailer or online dealer with whom the purchase contract was concluded. A direct claim to ORTLIEB is possible at any time and is not dependent on prior involvement of the dealer. To make a claim, please provide:

a brief description of the defect and, if possible, meaningful photos,
the product designation (and any identification/serial information),
a copy of the proof of purchase (invoice/delivery note showing the date of first delivery),
your sender/contact details for queries and return shipment.

ORTLIEB will confirm receipt and inform you about the further process. Processing will take place within a reasonable period after receipt of the complete documents. Contact for warranty processing: customerservice@ortlieb.de

6. Transport and shipping costs

Within the European Union, ORTLIEB bears the reasonable outbound and return shipping costs of the warranty processing. Outside the EU, ORTLIEB will assume the costs upon prior written approval. Please contact us before dispatch and await the return instructions. Unapproved chargeable express or special services will not be reimbursed.

7. Applicable law

This Warranty is governed by the law of the Federal Republic of Germany. Mandatory consumer protection provisions of the state in which the consumer has their habitual residence remain unaffected.

As of: September 2026

Free

85 €

Tax included.

Gravel-Pack Single

85 €

The ORTLIEB Gravel-Pack is a waterproof single bag with a volume of 14.5 litres. It offers reliable storage space for provisions, cooking utensils or additional equipment. The lightweight and abrasion-resistant material is designed for tough conditions on gravel and stone tracks. The waterproof roll closure ensures that adverse weather conditions cannot damage your luggage. Waterproofing is standard. The proven Quick-Lock mounting system attaches the Gravel-Pack securely and stably to the luggage rack. This makes the bag suitable for gravel, mountain or fat bikes. It secures your equipment during multi-day tours or races.

Specifications

Height

37 cm

Width

26 cm

Depth

12 cm

Volume

14.5 L

Load

12.5 kg

Weight

640 g

SKU

F9989

Waterproof

Yes ()

IP Ratings

The IP rating is an international standard that indicates how well a product is protected against dust and water.

The Gravel-Pack Single meets the IP64 protection rating:

Even in very heavy rain and splashing water, the contents stay perfectly dry. The Gravel-Pack Single is therefore ideal for longer outdoor adventures in stormy conditions.

All protection ratings at a glance

IP67

The product is dust-tight and protected against temporary immersion (up to 1 m for 30 min.).

IP64

The product is dust-tight and protected against splashing water from all directions.

IP54

The product is dust-protected and protected against splashing water from all directions.

IP53

The product is dust-protected and protected against spraying water up to 60° from vertical.

Material

PU-coated nylon (ps21r, ps33)

Mounting System

Quick-Lock2.2

Downloads

Instruction

Scope of delivery

1x pannier with QL2.2 moutning system

Spare parts

Carrying strap with carabiners (145 cm)

X-Stealth side-release buckle with strap

Repair kit for -Stealth- side-release buckles

QL2.1 Mounting Hooks

Semi-elliptical bracket for lower QL2.1 anchoring hook

Screw set

Stealth auxiliary closure strap QL2.1, black

Short QL2.1-rail with screws, without hooks

Edge protection QL2.1

QL2.2 Hooks

QL1/2/2.1/2.2 Anchoring hook

Warnings and safety information

Risk of injury due to incorrectly attached products! Before riding, check that the product is securely fastened.
Risk of injury due to loose components on the product. Screws can loosen over time due to vibrations. Therefore, check the screws after 100 km, 500 km, 1000 km and 1500 km and retighten them if necessary.
Risk of injury due to material breakage if overloaded! Do not exceed the maximum payload of 12,5 kg. If necessary, weigh your load to ensure that you do not exceed the maximum payload.

Care and usage instructions

Wipe clean with a damp cloth or clean with warm water and a mild soap solution. Remove heavier soiling carefully using a soft brush and gall soap.
Allow the bag to dry completely before storage.
To achieve protection class IP64 (6 = dust-tight, 4 = protected against water splashes from all directions), the closure must be rolled down 3–4 times and secured downward.
Keep free of coarse dirt.
Do not store the bag rolled up or folded, as this may cause the coating to crack.
If the product is fully submerged, water may enter through the closure.
Store protected from UV radiation to prevent the material from fading.
Reproofing is not necessary. The fabrics have a waterproof coating and therefore do not require any additional chemical treatment.
As signs of wear cannot be completely ruled out, it is recommended to protect all contact points between the bag mounting system and the luggage rack or bicycle frame with paint protection film.

Manufacturer information

ORTLIEB Sportartikel GmbH
Rainstraße 6
91560 Heilsbronn
Germany
deinservice@ortlieb.com

Frequently Asked Questions

How is the the Gravel-Pack Single mounted on the luggage rack?

With ORTLIEB’s Quick-Lock mounting systems, you can easily attach the bag to the luggage rack with one hand. Removing it is just as easy. You’ll find the exact mechanism for each Quick-Lock system on our overview page.

To Quick-Lock overview

Does the Gravel-Pack Single fit my luggage rack?

ORTLIEB bags with the Quick-Lock mounting system are compatible with almost all luggage racks. The Quick-Lock2.1 and Quick-Lock2.2 systems fit racks with tube diameters from 8 mm to 16 mm. Bags with Quick-Lock3.1 require special attachment points on the luggage rack, which can easily be retrofitted using a mounting kit if necessary.

To the QL3.1 mounting kit

How does the ORTLIEB Gravel-Pack differ from other ORTLIEB bike bags such as the Sport-Roller or Back-Roller?

The ORTLIEB Gravel-Pack shares many characteristics with other ORTLIEB bike bags such as the Sport-Roller or Back-Roller. It is also waterproof to IP64, extremely robust, and equipped with the proven roll closure. The volume is 14.5 liters per bag, the same as the Sport-Roller.
The key difference lies in its intended use: the Gravel-Pack is specifically designed for bikepacking and off-road touring. It is made from particularly lightweight, abrasion-resistant nylon fabric, making it ideal when every gram counts. Additional comfort features such as outer pockets or organizers were deliberately omitted to save weight and maximize freedom of movement in rough terrain.

How securely does the Gravel-Pack sit on the bike during rides on rough terrain?

The Gravel-Pack stays securely on the bike even on demanding terrain. Thanks to the robust Quick-Lock mounting system, the bags lock reliably onto the rack and remain stable even under vibrations and potholes. The low center of gravity also ensures balanced weight distribution and stable handling.

Where is the Gravel-Pack Single manufactured?

The Gravel-Pack Single is manufactured in Heilsbronn, Germany, standing for genuine “Made in Germany” quality. Every production step, from material cutting to final inspection, takes place in our own facilities. Materials are sourced locally, regionally, or internationally according to strict requirements. Our high standards for raw materials extend the product’s lifespan and conserve resources.

More about Made in Germany

Is the Gravel-Pack Single worth the price?

ORTLIEB products stand for durability and repairability. The Gravel-Pack Single is manufactured in our factory in Heilsbronn, Germany. We source materials locally, regionally, or internationally depending on what meets our high standards. We invest time in development to ensure the functionality of every detail.
Thanks to long-lasting materials, the bag is a reliable companion. Its lifespan puts the purchase price into perspective, especially since we offer a five-year warranty on our products. A wide range of repair and upgrade options further improves the price-performance ratio.
Repair before replacement: Every product is designed to be easy to repair and can, in most cases, be serviced by our Customer Service team in Heilsbronn. This extends its lifespan and conserves resources.

Our mounting systems compared

The Quick-Lock mounting systems on ORTLIEB bike bags allow the bags to be attached to bike racks quickly and securely. They are also known as self-locking mounting systems, because bike bags equipped with this system can be hooked onto the rack easily and securely. All mounting components are very easy to replace in the event of damage.

To the detailed overview of the mounting systems

Current variant Current variantQuick-Lock2.2

Quick-Lock3.1

Quick-Lock2.1

The evolution of the QL2.1 system, with higher payload and quick switching between different bikes.

The QL3.1 system secures the bag to the rack particularly quickly and easily and offers excellent carrying comfort away from the bike.

ORTLIEB’s most proven mounting system, trusted by millions of satisfied cyclists.

Feature

Quick, tool-free adjustment without reducer inserts

Back of bag is free of protruding hooks

Tool-free adjustment

Maximum payload

12.5 kg

9 kg

Compatible racks

Compatible with all conventional luggage racks

For racks with QL3.1-compatible mounting points. Can also be retrofitted with the QL3.1 Mounting Set.

Compatible with all conventional luggage racks

Compatible tube diameters

8–20 mm

8–16 mm (with QL3.1 Mounting Set)

8–20 mm

The hooks can be adjusted tool-free between 10 and 16 mm in 1 mm increments. With the QL2.1 hooks, 18 or 20 mm tubes can also be used.

The QL3.1 Mounting Set can be attached to racks with a tube diameter of up to 16 mm. For tube diameters from 11 to 16 mm, the adapter clamps are also required.

The 16 mm hooks can be adjusted to 8, 10 and 12 mm using the included reducer inserts. With the QL2.1 hooks and anchoring hooks, 18 or 20 mm tubes can also be used.

More features

Lockable

with the QL2-Lock or the anti-theft device

(not included)

—

with the QL2-Lock or the anti-theft device

(not included)

One-handed operation possible

Mounting components

On the bag

On the rack

On the bag